What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 13:20
I post the exact comment here.
what exactly is a ‘surge’ protector?
This is where the MOV conducts again, and dissipated the energy.
At one ohm, the resistor has a maximum of 1 watt power.
Here is a simplified AC power diagram.
One
Summer McIntosh Shatters 10-Year-Old 200 IM World Record in 2:05.70 - SwimSwam
It seems Mohan does not understand the difference between a comment and an Answer.
These devices are installed between the “hot” and “neutral” and protective ground.
the problem then depends on "how fast does the fuse operate?".
If you got to make your own K-pop year-end awards show for 2024, who would win?
There are three different concepts here that are getting confused.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
A fuse is a non-resetable over current circuit protector.
It also is a device that limits the change in current flow.
The third is lightning and “how it gets conducted into a home.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The bolt then partially travels down the line to your home.
eight
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Because the load is inductive, the current lags the voltage.(by a bit).
$14B in EV, renewable projects scrapped as tax credit fears grow - Electrek
Edit 2024–10.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
a photo is worth a thousand words.
2024–10–10[John johnson John Johnson ]
A circuit breaker is similar, but is resettable.
What does a fuse do?
But… the neutral is now “floating” because of the 1 ohm resistance.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then describes the function of a fuse.
How is the legalization of same-sex marriage impacting societal norms in the USA?
He then asserts :
This is the picture of an electronic coil of wire wound around a core of magnetic material.
but this device (an Inductor) … impedes the rapid changes in the current.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Barnstars:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Did Meghan Markle Use Her College boyfriend For Star Power?
This device then solves the entire problem.
This is 'the assistant's answer'
but I think this circuit , shows a few more pieces.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then describes Rainy Season and Lightning.
2024–10–14 [Omar Gharbi Omar Gharbi ]
What are your main K-pop groups? (Or groups you listen to)?
So, the voltage could go up to 500 volts, and the fuse will not open up.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
In schematic diagrams this is the symbol for a fuse:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One is “what exactly is in a ‘surge protector’ ? ”
First Sentence:
The other is “what does a “fuse” do?”
Upvotes:
2024–10–16 [ OO OLAOYE OYEBODE ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Now when you have a certain ac resistance, then a current flows in a loop.
These are simplified answers to the original question, and does not change anything I wrote above.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
(Dc diagram shown, AC is similar).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
There are two important concepts here.
But it can get overloaded, and no longer works.
[old diagram got deleted by accident]
so, what happens?
At least they know the answer if they wanted it.
This is where this question deviates from being a 'generic' question, and becomes more specific.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What is lightning?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
For this case there are devices called Metal oxide varistors (MOV).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
nine
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
An AC voltage/ current source, and an ac inductive load.
The MOV will conduct when the voltage exceeds 50% of line voltage.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[image of Common-mode choke]
This one hit behind the barn.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.